Resins
MPK70 – 180 second Casting Resin
A 65-70D hardness, Very Strong with a little flex (not brittle) 50/50 mix, odorless, paintable, 180 sec Gel Time, No leeching, fast de mold time, excellent detail, VERY VERY easy to sand & trim. Will take a pigment.
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Description | Price | Quantity | Action | |
|---|---|---|---|---|---|---|
|
Product Not Available
|
||||||
MPK70 – 5 Minute Casting Resin
Has 5-6 minute GEL TIME casting resin. Light tan in color. Odorless, 50 /50 mix. Paintable. After de molding easy trimming, clean up and sanding. Ideal for those small model parts that need to be cured in a pressure pot for air free parts. Excellent detail.
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Description | Price | Quantity | Action | |
|---|---|---|---|---|---|---|
|
Product Not Available
|
||||||
MPK70 – 10 Minute Casting Resin
Has 10 minute GEL TIME casting resin. Light tan in color. Odorless, 50 /50 mix by weight. Paintable. After de molding easy trimming, clean up and sanding . Ideal for those small model parts that need to be cured in a pressure pot for air free parts. Excellent detail.
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Price | Quantity | Action | |
|---|---|---|---|---|---|
|
Product Not Available
|
|||||
MPK 90 High Impact 3 Min Casting Resin
The MPK-90-3min Hi Impact casting resin is a very strong semi flexible casting resin. Ideal with applications that require more strength than regular casting resins. With this product you do have the capabilities to do brush ups layer upon layer. The MPK-90-3min is paintable, no leeching, odorless and tintable
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Description | Price | Quantity | Action | |
|---|---|---|---|---|---|---|
|
Product Not Available
|
||||||
MPK90 3 Min Hi Impact Black Casting Resin
The MPK-90-180min Hi Impact Black casting resin is a very strong semi flexible casting resin. Ideal with applications that require more strength than regular casting resins. With this product you do have the capabilities to do brush ups layer upon layer. The MPK-90-3min is paintable, no leeching, and odorless.
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Description | Price | Quantity | Action | |
|---|---|---|---|---|---|---|
|
Product Not Available
|
||||||
Tooling Resin MPK18-80 Tooling Resin Kit
MPK-18-80 is a very hard, filled, LOW SHRINK tooling resin. 80D hardness. 50/50 mix. Light gray in color. Hi-heat resistant. 8-10 minute work time.
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Description | Price | Quantity | Action | |
|---|---|---|---|---|---|---|
|
Product Not Available
|
||||||
Pigments
PIGMENTS are only available for purchase with an order of CASTING RESIN
Our pigments are highly concentrated and typically require very little pigment to achieve the desired color. Note : this is not an exact science and your mixed color may vary from batch to batch.
They are packaged in a wide mouth screw cap container for ease of use. The manufacturer of our casting resins suggests that the pigment be added to the B side of the resin.
PLEASE READ: When using these pigments ALWAYS put paper down. YOU MUST WEAR GLOVES, do not get on skin , do not spill on any surface. VERY, VERY, VERY difficult to clean off skin and almost impossible to clean off most surfaces.
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Description | Price | Quantity | Action | |
|---|---|---|---|---|---|---|
|
Product Not Available
|
||||||
Silicone/Resin Starter Kit
This “Starter Kit” contains the high quality silicone and resin needed to produce small projects. Just the right amounts to familiarize yourself with our products.
Showing 0 - 0 out of 0
Page 0 out of 0
| Thumbnails | Products | Description | Price | Quantity | Action | |
|---|---|---|---|---|---|---|
|
Product Not Available
|
||||||