This Video shows Carl Hill Working with MPK-70 POLYURETHANE CASTING RESIN.
Designed for the beginner, artist Jon Neill shows how to make an open face mold using 2125 silicone with mold master green catalyst. Then how to cast from the mold using MPK70 casting resin. This video showcases the products and materials sold here on our site.
Creating a two part mold – from creating a clay lay up to making both mold sections and a resin casting. It shows how to fix common situations such as silicone bleeding when they occur.
How To Make A Silicone Mold Safety and Precautions: Please refer to the Material Sheet which accompanied your shipment. All products should be used with good ventilation. Skin and eye contact, ingestion and breathing of dusts and vapors should be avoided. It is recommended you use gloves, dust masks, and eye protection. Types of RTV […]
How to make a Silicone Mold and Castings (for advanced modelers) 1. Before you start it is suggested you spruce you part. This basically means build a stand of sorts at the bottom of the piece your are wanting to mold & cast. ( in this picture the spruce starts at the bottom & sides […]